{"title":"Accessories","description":"","products":[{"product_id":"i-drive-throttle-controller-motor-vehicle-engine-parts-rotorua","title":"I-Drive Throttle Controller","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eLEAVE ORDER NOTE WITH YOUR REGO: ANY NEW VEHICLE\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eThe EVC Throttle Controller is a plug and play throttle controller that gives you complete control over the responsiveness of your vehicle. It does this by providing new points of reference for your throttle mapping, introducing either a sharper or duller throttle curve depending on what\u003c\/p\u003e\r\n\u003cp\u003emode\/setting has been selected.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eEASY TO INSTALL\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe EVC Throttle Controllers are a plug and play product, easily installed in 5-10 minutes. If you can change a lightbulb on your vehicle you can install one of these! Simply connect in-line between the factory plug and throttle pedal assembly. The Display\/Controller can be placed on the dash or console of the vehicle.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003e*Please note: due to LED lights, the driver interface should be positioned so as not to distract the driver.*\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFACTORY MODE\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eBypass your throttle controller and revert back to a factory feel.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eULTIMATE MODE\u003c\/strong\u003e\u003cbr\u003eUltimate Mode offers 9 sensitivity levels, this allows the driver to tune the controller to the desired level of sensitivity. Choose level 9 and grip the steering wheel tight or hit level 1 for a gentle smooth acceleration. (9 Levels)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eECO MODE\u003c\/strong\u003e\u003cbr\u003eECO mode is designed for economy by reducing the accelerator response time. Also handy when you are on the trails and looking for a bit more throttle control when crawling.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAC MODE\u003c\/strong\u003e\u003cbr\u003eAutomatic control mode automatically selects the sensitivity level based on pedal pressure. If you are in traffic and accelerating gently the EVC-iDRIVE will automatically choose a reduced level of throttle response.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eULTIMATE 9 MODE\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eFor maximum throttle enhancement, Ultimate9 mode instantly sets the pedal response to U9, the highest setting.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLAUNCH MODE\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eInstantly set the pedal response to the highest setting. However, the input is slightly modified compared to Ultimate9 mode, reducing the likelihood of wheel spin \u0026amp; increasing traction.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eADAPT MODE\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eSet \u0026amp; forget - automatically choose the best, enhanced throttle response based on the pressure applied to your throttle pedal.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eANTI-SLIP MODE\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eReduce your maximum throttle response and limit your RPM. The greater you set the sensitivity, the slower \u0026amp; more controlled your throttle response becomes. (9 Levels)\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eVALET MODE\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eDesigned for parking, Valet mode reduces throttle response whilst limiting the available throttle to provide approximately 50% maximum RPM.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLOCK MODE\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAdd an extra level of security to your vehicle by blocking all throttle input from the accelerator pedal so nobody can steal your pride \u0026amp; joy.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eEVC-X iOS and Android App\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eSimple to use, this app allows you to easily explore your EVC-X's layouts, colour schemes, modes and sensitivity levels. Free to install via the Apple App Store, Google Play or QR code provided in the EVC-X instructions.\u003c\/p\u003e","brand":"I-Drive","offers":[{"title":"Default Title","offer_id":44297614983304,"sku":null,"price":350.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3618\/8040\/files\/i-drive-throttle-controller-ajf-4x4-324.webp?v=1767438059"},{"product_id":"6x139-7-slip-on-spacers-rotorua","title":"6X139.7 SLIP ON SPACERS","description":"\u003cform method=\"post\" action=\"https:\/\/caold.com.au\/cart\/add\" id=\"AddToCartForm-product-template\" class=\"product-form product-form--payment-button\" enctype=\"multipart\/form-data\"\u003e\n\u003cdiv class=\"product-form__item product-form__item--submit\"\u003e\n\u003cdiv data-shopify=\"payment-button\" class=\"shopify-payment-button\"\u003e\n\u003cdiv class=\"product-single__meta small--text-center\"\u003e\n\u003cp\u003e\u003cspan\u003e6x139.7 Slip-On Wheel Spacers – 3mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese 3mm slip-on wheel spacers are designed for vehicles running a 6x139.7 stud pattern with a 106.1mm centre bore. Ideal for minor track width adjustments where clearance is tight and a hub-centric fit is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupplied as a matched pair.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Thickness: 3mm Aluminium\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Stud pattern: 6x139.7\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Centre bore: 106.1mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Quantity: 1 pair (2 spacers)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLVV Compliance Information\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach pair is supplied with 2 x M4 countersunk screws for attachment to the brake rotor. Rotor attachment is a requirement for LVV certification compliance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eImportant Notes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Drilling and tapping of the brake rotor is required\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Drilling, tapping, and correct installation are the responsibility of the purchaser\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Professional installation is strongly recommended\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Certification requirements may vary depending on vehicle and overall wheel setup\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/form\u003e","brand":"AJF 4X4 ","offers":[{"title":"Default Title","offer_id":44696344035464,"sku":null,"price":180.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3618\/8040\/files\/6x139-7-slip-on-spacers-ajf-4x4-465.webp?v=1768602848"},{"product_id":"toyota-hilux-n80-16-on-psr-2-body-lift-kit-dual-cab-with-tray","title":"Toyota Hilux N80 16-on PSR 2\" Body Lift Kit (Dual Cab with Tray)","description":"\u003cp data-start=\"161\" data-end=\"225\"\u003e\u003cstrong data-start=\"161\" data-end=\"225\"\u003eToyota Hilux N80 16-on 2″ Body Lift Kit (Dual Cab with Tray)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"227\" data-end=\"408\"\u003e\u003cstrong data-start=\"227\" data-end=\"243\"\u003eApplication:\u003c\/strong\u003e Toyota Hilux N80 (2016-on) – Dual Cab with Tray\u003cbr data-start=\"291\" data-end=\"294\"\u003e\u003cstrong data-start=\"294\" data-end=\"310\"\u003eLift Height:\u003c\/strong\u003e 2 inch body lift\u003cbr data-start=\"327\" data-end=\"330\"\u003e\u003cstrong data-start=\"330\" data-end=\"344\"\u003eLead Time:\u003c\/strong\u003e Special Order – approx. 10 day standard lead time from Australia\u003c\/p\u003e\n\u003cp data-start=\"410\" data-end=\"664\"\u003eThis is a \u003cstrong data-start=\"420\" data-end=\"465\"\u003ecomprehensive, high-quality body lift kit\u003c\/strong\u003e designed specifically for the Toyota Hilux N80 dual cab with tray configuration. All components are engineered to ensure correct body alignment, durability, and long-term reliability once installed.\u003c\/p\u003e\n\u003cp data-start=\"666\" data-end=\"991\"\u003e\u003cstrong data-start=\"666\" data-end=\"679\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-start=\"679\" data-end=\"682\"\u003e• Complete kit – no shortcuts or pieced-together components\u003cbr data-start=\"741\" data-end=\"744\"\u003e• Manufactured from high-quality materials for strength and longevity\u003cbr data-start=\"813\" data-end=\"816\"\u003e• Precision-engineered to suit N80 dual cab tray models\u003cbr data-start=\"871\" data-end=\"874\"\u003e• Maintains factory ride quality and suspension geometry\u003cbr data-start=\"930\" data-end=\"933\"\u003e• Ideal for increased tyre clearance and accessory fitment\u003c\/p\u003e\n\u003cp data-start=\"993\" data-end=\"1181\"\u003e\u003cstrong data-start=\"993\" data-end=\"1003\"\u003eNotes:\u003c\/strong\u003e\u003cbr data-start=\"1003\" data-end=\"1006\"\u003e• Body lift only – suspension remains unchanged\u003cbr data-start=\"1053\" data-end=\"1056\"\u003e• Professional installation recommended\u003cbr data-start=\"1095\" data-end=\"1098\"\u003e• Vehicle certification requirements may apply depending on use and configuration\u003c\/p\u003e","brand":"PSR","offers":[{"title":"Default Title","offer_id":44765819633800,"sku":null,"price":899.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3618\/8040\/files\/toyota-hilux-n80-16-on-psr-2-body-lift-kit-dual-cab-with-tray-ajf-504.webp?v=1770759609"},{"product_id":"45mm-diff-drop-kit-fit-for-nissan-navara-d40-d23-np300-2005-on","title":"45MM Diff Drop Kit Fit For Nissan Navara D40 D23 NP300 2005-on","description":"\u003cp dir=\"auto\"\u003e\u003cstrong\u003ePremium 45mm Front Diff Drop Kit – Direct Fit for Nissan Navara D40, D23 \u0026amp; NP300 (2005-Onwards)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eProtect your drivetrain and maximise off-road performance with this high-quality \u003cstrong\u003efront diff drop kit\u003c\/strong\u003e, engineered specifically for lifted Nissan Navara models. A must-have when installing a 2–4\" lift kit on your Navara to prevent premature CV joint wear, vibrations, and driveline stress.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003ePerfect Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eNissan Navara \u003cstrong\u003eD40\u003c\/strong\u003e (2005–2015)\u003c\/li\u003e\n\u003cli\u003eNissan Navara \u003cstrong\u003eD23 \/ NP300\u003c\/strong\u003e (2015–current, including latest models) Broad fitment across both generations (2005-onwards), suitable for most King Cab, Dual Cab, and 4x4 variants. (Primarily right-hand drive markets like NZ\/Australia; confirm your suspension setup and lift height.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eLowers the front differential\u003c\/strong\u003e by approximately \u003cstrong\u003e45mm\u003c\/strong\u003e (common spec for these kits) to restore optimal CV joint angles after lifting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces CV joint strain\u003c\/strong\u003e — dramatically extends the life of expensive CV axles and boots by correcting extreme operating angles caused by raised suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimises vibrations \u0026amp; noise\u003c\/strong\u003e — smoother driveline operation on-road and improved articulation off-road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-on installation\u003c\/strong\u003e — no cutting, welding, or major modifications required. Includes heavy-duty brackets, spacers\/pucks, high-strength bolts, and all necessary hardware for a straightforward fit (typically 2–4 hours in a home garage or workshop).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt tough\u003c\/strong\u003e — Manufactured from high-grade steel with durable black powder coat finish for corrosion resistance in harsh NZ conditions (beach runs, farm work, or muddy tracks).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo significant ground clearance loss\u003c\/strong\u003e — The drop is targeted at the diff mount, preserving your lifted height while protecting components.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AJF 4X4 ","offers":[{"title":"Default Title","offer_id":44847174484104,"sku":null,"price":650.0,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3618\/8040\/files\/45mm-diff-drop-kit-fit-for-nissan-navara-d40-d23-np300-2005-on-ajf-710.webp?v=1772147529"},{"product_id":"colorado-7-rg-isuzu-d-max-tfr-mu-x-blackhawk-upper-control-arm-kit","title":"Colorado 7\/RG, Isuzu D-Max TFR \u0026 MU-X Blackhawk Upper Control Arm Kit","description":"\u003cp\u003e\u003cspan\u003eCaster adjusted front control arm kit.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSuits:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHolden Colorado RG 2WD \u0026amp; 4WD 2012-16 \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eColorado 7 to 2016, not 2017 onward models.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIsuzu DMax TFR 2012 to 2020, not 2020 facelift models.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIsuzu MU-X MU-X 2013-on \u003c\/span\u003e\u003cbr\u003e\u003cb\u003eNB:\u003c\/b\u003e\u003cspan\u003e Factory width 16 inch wheels (+33 offset) fit, wider wheels require less (more negative) offset to avoid clearance issues.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNotes: BLACKHAWK Upper Arms - Offset for lifted vehicle\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe heavy duty Roadsafe \"BLACKHAWK\" range of Upper Control Arms have been designed with ease of fitment and ongoing serviceability in mind, and are a necessity for various IFS models that have been lifted 30mm+.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe Roadsafe \"BLACKHAWK\" arms have been designed to restore camber \u0026amp; caster lost on the IFS vehicles once they have been lifted, by correcting the angle of the ball joint. Without restored camber \u0026amp; caster settings lifted IFS vehicles will eventually show excessive tyre wear and experience ride and steering issues.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWith greater radius and tube sizing (Heavy Duty 32mm OD, 6mm wall thickness STKM11A Carbon Steel Tube) to suit, the designs allow clearance of the coils during articulation, with the outer radius also adjusted to allow for the fitment (in some cases) of 35\" tyres without having the issue of the tyres rubbing on the arms during full lock.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThese arms have a bolt on ball joint. The factory fitted split washers on the 4 ball joint bolts should be removed. Tighten the bolts to 45nm. (these bolts are only hand tight).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBlackhawk upper control arms come fitted with the 'Next Gen High articulation HD' chromoly greasable ball joints.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe vehicle droop stops will prevent excess droop\/down travel from the front suspension protecting other components of the suspension. The Blackhawk arms have been designed to replicate the Original design while offering corrected caster and camber, with increased internal and external clearances. For those that have customised suspension and would like more droop they can quickly \u0026amp; easily trim the factory droop stop bracket as required to suit their suspension requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"AJF 4X4 ","offers":[{"title":"Default Title","offer_id":44874943856776,"sku":null,"price":849.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3618\/8040\/files\/colorado-7-rg-isuzu-d-max-tfr-mu-x-blackhawk-upper-control-arm-kit-256.webp?v=1773039006"},{"product_id":"genuine-front-cv-driveshaft-to-suit-toyota-hilux-n70-kun26-2005-2015","title":"Genuine Front CV Driveshaft to suit Toyota Hilux N70\/KUN26 2005-2015","description":"\u003cp\u003eGenuine Front CV Driveshaft to suit Toyota Hilux N70\/KUN26 2005-2015\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x CV Driveshaft - 43430-0K023\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003cbr\u003e- Front Axle Fitment\u003cbr\u003e- Genuine Toyota Product\u003cbr\u003e- Greased and ready to install\u003c\/p\u003e","brand":"AJF 4X4 ","offers":[{"title":"Default Title","offer_id":44934124732552,"sku":"43430-0K023","price":495.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3618\/8040\/files\/genuine-front-cv-driveshaft-to-suit-toyota-hilux-n70-kun26-2005-2015-585.webp?v=1774572366"},{"product_id":"genuine-front-cv-driveshaft-to-suit-toyota-hilux-n80-2015-onwards","title":"Genuine Front CV Driveshaft to suit Toyota Hilux N80 2015-Onwards","description":"\u003cp\u003eGenuine Front CV Driveshaft to suit Toyota Hilux N80 2015-Onwards \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e1x Genuine Front CV Driveshaft - 43430-0K070\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003cbr\u003e- Genuine Toyota Part\u003c\/p\u003e","brand":"AJF 4X4 ","offers":[{"title":"Default Title","offer_id":44934132727944,"sku":null,"price":545.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3618\/8040\/files\/genuine-front-cv-driveshaft-to-suit-toyota-hilux-n80-2015-onwards-ajf-274.webp?v=1774572610"},{"product_id":"marks-4wd-can-bus-speedo-corrector-toyota-hilux-gun-08-2016-on","title":"Marks 4WD CAN Bus Speedo Corrector – Toyota Hilux GUN (08\/2016 on)","description":"\u003ch2\u003e\u003cstrong\u003eCAN Bus Speedo Corrector – Toyota Hilux GUN (08\/2016 on) \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eOur Marks 4WD CAN Bus speedo corrector enables you to calibrate your Toyota Hilux speedometer to compensate for tyre size and\/or differential ratio changes.\u003c\/p\u003e\n\u003cp\u003eThe ability to calibrate your speedo within the vehicle is a major advantage when changing your tyres, as there can be differences in the revs per kilometre between tyre brands of the same size or when switching between mud and road tyres.\u003c\/p\u003e\n\u003cp\u003eThis unit is a wire-in device; therefore, the installer requires electrical\/wiring know-how, as the wiring will need to be cut and resoldered.\u003c\/p\u003e\n\u003cp\u003eDesigned, engineered and assembled in Australia, supporting our local industry\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSimple in-vehicle adjustment (No need to return to the supplier for reprogramming when you change your tyre size)\u003c\/li\u003e\n\u003cli\u003eAdjusts the speedo in \u003cstrong\u003ePositive \u003c\/strong\u003e2% increments up to \u003cstrong\u003e20% change\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRange of adjustment: 0, 2, 4, 6, 8, 10, 12, 14, 16, 18 and 20%\u003c\/li\u003e\n\u003cli\u003eCompact size measuring 75 x 30 x 15mm\u003c\/li\u003e\n\u003cli\u003eEasily mounted behind the dashboard\u003c\/li\u003e\n\u003cli\u003eDesigned \u0026amp; Engineered in AUSTRALIA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpeedo Corrector\u003c\/li\u003e\n\u003cli\u003eWiring Harness\u003c\/li\u003e\n\u003cli\u003eDownloadable Instructions specific to the Toyota Hilux\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eTo Suit – Toyota Hilux\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eGUN N80 08\/2016 on models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThis unit is designed for vehicles that use a CAN bus-driven speedo.\u003c\/li\u003e\n\u003cli\u003eThe odometer remains uncorrected\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AJF 4X4 ","offers":[{"title":"Default Title","offer_id":46118154928264,"sku":null,"price":599.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3618\/8040\/files\/marks-4wd-can-bus-speedo-corrector-toyota-hilux-gun-08-2016-805.webp?v=1781671926"}],"url":"https:\/\/ajf4x4.co.nz\/collections\/accessories-rotorua\/holden-colorado.oembed","provider":"AJF 4X4 ","version":"1.0","type":"link"}